Issues filed for maniacbug/RF24

View Full Project
Do you use RF24? Leave a review!

Rate of open issues in the last 60 days

RF24 open issues (View Closed Issues)
  • almost 2 years isPVariant returning false for a actual P variant chip.
  • almost 2 years How to set UUID of nrf24l01
  • almost 2 years radio.setPALevel((RF24_PA_LOW)) not working.
  • about 2 years trying to work with RF24 and nodemcu having problem sending
  • over 2 years Can amount of available data be known?
  • over 2 years nrf24l01 library issue
  • over 2 years Problems to run example Scanner dont find WProgram.h
  • over 2 years nrf24 between BananaPi and Arduino
  • over 2 years READ THIS - THIS LIBRARY IS NOT MAINTAINED; LINK TO UPDATED LIBRARY
  • almost 3 years Problem with delay after write()
  • almost 3 years Setup always returns false
  • about 3 years ask
  • about 3 years SETUP_AW reset
  • about 3 years ACK fails one direction.
  • about 3 years RPi 2: can't send spi message: Invalid argument
  • over 3 years Solution to problems with RF24 not working reliably.
  • over 3 years NEW - Updated/Actively Maintained RF24 Library Fork
  • over 3 years I need a working module
  • over 3 years please tag stable versions of library
  • over 3 years Failed to send packets.
  • over 3 years GettingStarted example should be revised
  • over 3 years rssi question
  • over 3 years Not initializing correctly with DigiX board.
  • almost 4 years Printf and printDetail issue?
  • almost 4 years Problem to implement with nRF24L01
  • about 4 years Last characters received of last receive repeated n times in the following message
  • about 4 years Wrong value of ARD in SETUP_RETR
  • over 4 years RF24 library and a PROGMEM macro
  • over 4 years Cannot establish Communication
  • over 4 years No downloads listed
  • over 4 years Arduino become "Unknown device" in Windows if printf.h not include
  • over 4 years Arduino Micro
  • over 4 years Radio issue when Serial Monitor is up
  • over 4 years Sending node pipe using ethernet
  • over 4 years I can't send because my STATUS doesn't change.
  • almost 5 years getDynamicPayloadSize() issue
  • almost 5 years Defining CONFIG is not very smart
  • about 5 years Arduino UNO doesn't send packets?
  • about 5 years Downloads Page
  • about 5 years RF24:Read documentation wrong for return value.
  • about 5 years Payload ack example does not work
  • over 5 years Issue with compiling GettingStarted.pde
  • over 5 years Library dowload
  • over 5 years Too poor
  • over 5 years Does not work with Arduino DUE
  • over 5 years Timing issue if for startWrite, if not using an external clock
  • over 5 years How to get signal strength?
  • over 5 years Basic clarifications
  • almost 6 years RF24 library for WIRING
  • almost 6 years sensornet report compilation error in Arduino1.0.1
  • almost 6 years Cant get Getting started working
  • about 6 years Problems on setting Power level
  • over 6 years GetingStarted not stable with ethernet shield ?

RF24 closed issues

  • over 2 years No files availible?
  • almost 3 years Unable to change MISO/MOSI/SCK Pins
  • over 3 years RF24 radio.printDetails() does not print anything on serial monitor
  • almost 6 years Issue with Payload Ack package
  • over 6 years RF24::write(